Page 55 - Water_Controls_Professional_Catering
P. 55
Electronic controls BINOPTIC deck-mounted /
BINOPTIC
Electronic mixer and tap, battery or mains operated
NON-CONTACT CONTROLS
• Independent IP65 electronic control unit.
• 230/12V mains supply with transformer or battery-operated with CR123 6V Lithium batteries.
• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 - 6 lpm.
• Scale-resistant flow straightener.
• Adjustable duty flush (pre-set flush ~60 seconds every 24 hours after last use).
• Active, infrared presence detection, sensor at the end of the spout optimises detection.
• Chrome-plated brass body. Long lever
• Spout with smooth interior and low water volume (reduces bacterial development).
• PEX flexibles with filters and solenoid valves.
• Fixing reinforced by 2 stainless steel rods.
• Anti-blocking security.
• Side temperature control with adjustable maximum temperature limiter
and long lever on the mixers.
• 30-year warranty.
Two drop heights available depending on the choice of basin:
H. 170mm for semi-recessed washbasins.
H. 250mm for countertop washbasins.
Ø15mm for
M⅜" comp. fittings 250
(UK/Ireland) 170 160
BINOPTIC MIX mixer (long handle) 82
Mains supply H. 170mm 388MCHLH 388MCHLH15 175 185
Mains supply H. 250mm 398MCHLH 398MCHLH15 110x75x40 110x75x40
Battery-operated H. 170mm 488MCHLH 488MCHLH15 40 max 40 max
Battery-operated H. 250mm 498MCHLH 498MCHLH15 420
BINOPTIC tap 420
Mains supply H. 170mm 388015 38801515
Mains supply H. 250mm 398015 39801515
Battery-operated H. 170mm 488015 48801515 3/8" Ø15
Battery-operated H. 250mm 498015 49801515
We recommend installing a TMV for taps (see page 84)
388015 49801515
Non-contact controls 53