Page 254 - Water_Controls_for_Public-Commercial

/ Solutions for safety controls

SAFETY CONTROLS:
SPECIFICALLY DESIGNED FOR RAPID DECONTAMINATION

In order to address the risk of contamination to the body, Efficient
face and/or eyes posed by harmful chemicals, DELABIE's safety controls deliver large flow rates
DELABIE has developed a range of safety controls. which ensure rapid decontamination:
DELABIE's safety showers and eye wash stations - Eye wash stations: flow rate 20 lpm at 3 bar dynamic
provide users with an efficient decontamination pressure.
facility at the site of the incident, especially during - Showers: flow rate 96 lpm at 3 bar dynamic
Even, conical flow the initial treatment phase. pressure.
The diameter and position of the 74 holes
Safety in the shower head are designed for optimised rinsing.
The shower head with spray diffuser ensures
an optimised spray for the whole body. The diameter User comfort
and orientation of the diffuser ensures an even, The protective caps eject automatically with
conical flow. the pressure when the equipment is activated.
The spray heads are fitted with aerators and stainless The spray heads are fitted with aerators which ensure
steel double filters to prevent any large debris a gentle spray to avoid further injury to the user.
in the water pipes coming into contact with the eyes.
Protective caps prevent dust and other airborne Quick to install
contaminants entering the valve. The controls DELABIE’s safety controls are quick and easy to install.
Optimised rinsing for eyes
are easy to access. A mixed, potable water supply should be considered
(DELABIE recommends installing a pre-mixer
or a thermostatic mixing valve depending on the nature
Reliable
DELABIE's safety controls are fitted with frost-free and flow rate of the equipment, see page 143).
mechanisms as standard (see below). So that the location of safety controls can be easily
They are made from corrosion-resistant materials. identified, green identification signs are supplied
with each item.
Frost-free system as standard
Most safety equipment is installed outside Easy to operate
or in buildings that are not heated. DELABIE's safety controls are designed to be quick
DELABIE's safety controls are fitted with frost-free and easy to operate.
Frost-free system comes systems as standard and can be installed inside Water flows when the triangular handle is pulled,
as standard or outside buildings. the foot pedal is pressed or the hand control is pulled
The frost-free system ensures that the riser column towards the user.
and shower head will deliver a proper spray with every
use (see below). Compliance
DELABIE's safety controls comply with the following
The upstream supply pipework must also be
YEAR protected from freezing temperatures. European standards:
- safety showers: European standard EN15154 1.
- eye wash stations: European standard EN15154 2.
- identification signs: International standard ISO
WARRANTY
3864 1 covering graphic symbols, safety colours
and safety signs in the work place and public places.
The horizontal This standard is included in the European directive
section drains via 92/58/CEE standard.
the shower head
Easy to maintain
Standard parts can be replaced without dismantling
the equipment. Maintenance staff can change
the parts quickly and easily.
The vertical
section drains The equipment must be checked every 15 days
by gravity when to ensure that it is in good working order.
the valve
is closed 30-year warranty against any manufacturing defects.
50 years repairability.

Water supply

252 Safety controls