Page 93 - Water_Controls_Professional_Catering
P. 93

Certification and standards /


            WHAT IS THE NF MARK?                       THE NF MARK IS TO BE FOUND
                                                       ON WHAT PRODUCTS?                          ACS
                                                                                                  ACS: All DELABIE
            The NF Mark affixed on a product attests that    The NF Mark is affixed on the following   products comply with the
            the latter complies with the relevant standards   products:                           French CPDW directive
            and with complementary technical specifications                                        and the 29 May 1997
            requested by the market, where appropriate.  • SANITARY WATER CONTROLS                decree modified by the
                                                       - single taps and mixer taps;              Ministry of Health DGS/
                                                                                                  SD7A2002 number 571
            • SANITARY WATER CONTROLS                  - mechanical mixer taps;                   of 25 November 2002.
            The characteristics are specified in the technical   - thermostatic mixing valves;
            documents, prepared with the participation of   - flow rate regulators;
            the manufacturers, the distributors, the consumer   - shower outlets for sanitary tapware;
            associations, the laboratories and the public authorities,   - extractable handsprays for sink and washbasin
            fixed by AFNOR Certification and monitored      mixer taps;
            by the "Centre Scientifique et Technique du Bâtiment"   - shower hoses for sanitary tapware;  CE certification
            (CSTB) (Scientific and Technical Building Centre).   - waste fittings;                  for electronic taps
            CSTB carries out tests on the products and the audits   - automatic shut-off valves;  and valves:
            on the companies as part of this application.  - stop valves mounted:                 directives 2014/30/UE
                                                         - upstream from sanitary tapware;        and 2014/35/UE.
                                                         - on a WC flushing cistern;
            WHAT DOES THE NF MARK                        - to supply a washing machine;
            ACCORD?                                    - multiway selector;
                                                       - automatic diverter, Family H, type C;
                                                       - electronic opening and closing valve,
            > Sanitary water controls                    and specifies the ratings for some of them.  ROBINETTERIE SANITAIRE
            The NF Mark – SANITARY TAPWARE certifies                                               NF EN certification:
            the compliance of products with the certification                                      French and European
            reference system approved by AFNOR Certification.   WATER REGULATIONS                  standards
            In particular, this guarantees:            ADVISORY SERVICE                           NF EN 816
                                                                                                  NF EN 817
            > For automatic shut-off valves                                                       NF EN 1111
            - quality of the surface covering          All sanitary fittings that deliver water from a public mains
            - interchangeability of valves             water supply must comply with the Water Supply
            - tightness before and after endurance test   (Water Fittings) Regulations (1999) or Scottish Byelaws.
            - intercommunication between cold water    These fittings must be of an 'appropriate quality
               and hot water                           and standard' and must not contaminate the water
            - flow rates appropriate to the application   or cause wastage. Products that are WRAS approved
            - checking the flow time                    demonstrate this compliance and are recognised
            - mechanical performances                  by all water suppliers in the UK.
            - wear resistance for the control devices
            - acoustic performances.
                                                       TMV3 SCHEME
            > For mechanical mixers                                                               NSF TMV3 scheme
            - quality of the surface covering;         The TMV scheme is an independent third party
            - interchangeability of mixer taps;        approval scheme administered by NSF International.
            - tightness before and after endurance test;  The TMV3 scheme certifies that products comply with
            - intercommunication between cold water and hot water;  performance requirements of the UK Department
            - flow rates appropriate to the application;  of Health's HTM 04 01: Supplement Performance
            - use comfort depending on the sensitivity,   Specification D08 in healthcare and commercial
              the precision and the temperature constancy;  applications in the UK.
            - mechanical performances;                 NSF International also certifies Type 2 thermostatic   ISO certification
            - wear resistance for the control devices;  mixing valves comply with the requirements of   ISO 9001: 2015
            - acoustic performances.                                                              Quality Management
                                                       European standards EN 111 and EN 1287.
                                                                                                  System
            HOW DOES ONE RECOGNISE
            AN NF PRODUCT?                                                                        Other certification:
                                                                                                  DELABIE exports to over
            To distinguish products that have been admitted to                                    90 countries worldwide.
            the NF Mark in the shops and during installation, the
            NF logo is affixed on the products themselves.
                                                                                                                          MAINTENANCE – STANDARDS - INDEX










                                                                                        Certification and regulations  91
   88   89   90   91   92   93   94   95   96   97   98