Page 50 - Water_Controls_for_Public-Commercial

/ Time flow basin controls

TECHNICAL SOLUTIONS SUITABLE SPECIFICALLY DESIGNED FOR
FOR ALL CONSTRAINTS COMMERCIAL ENVIRONMENTS

Public and commercial buildings have different Resistant to intensive use and vandalism
requirements depending on the place of installation DELABIE’s time flow mixers and taps are specifically
and type of user. DELABIE has developed specific designed to withstand intensive use as well as
products to respond to a variety of challenges voluntary and involuntary vandalism.
(improving comfort, avoiding waste, user safety, etc.). The mixer and tap bodies are made from chrome-plated
brass, fitted with shock-resistant mechanisms.
Soft technology: Soft technology: soft-touch operation The reinforced fixings will stand up to intensive use.
soft-touch operation
DELABIE has developed time flow mixers and taps Streamlined designs prevent unwanted removal.
with soft-touch operation. Soft technology allows For areas that require tamperproof installations,
all users (children, the elderly or people with reduced there are recessed and cross wall versions which have
mobility) to use the mixers and taps with no effort mechanisms that cannot be accessed by the user.
required.
TEMPOSOFT 2, TEMPOMIX and TEMPOMIX 3 models Superior endurance
require half the effort to operate compared to The time flow mechanisms in DELABIE mixers and taps
conventional taps/mixers. are hard-wearing. The hydraulic timing system
with a calibrated groove is self-cleaning, which extends
AB anti-blocking system: waste prevention its lifespan to over 500,000 operations.
To avoid abuse and waste, TEMPOSTOP and There is no metal-metal or metal-plastic friction,
TEMPOMIX 3 models can be fitted with an ensuring reliable and durable timing.
AB anti-blocking system
AB anti-blocking system. DELABIE’s mixers and taps perform to the highest
This prevents the valve from being blocked in the open standards. Each model is subjected to endurance tests
position. Water will not flow unless the push-button under extreme conditions in endurance laboratories.
is released.
Easy to install
Temperature selection For quick activation and comfort with no splashing
Mixer versions (MIX) of DELABIE’s time flow mixers all DELABIE's time flow mixers and taps are pre-set
and taps are available. They offer the user additional at 3 lpm at 3 bar. They can, however, be adjusted
comfort by allowing them to choose the water from 1.4 (see environmental labels) to 6 lpm.
temperature. The temperature can be adjusted via the They are supplied with a pre-set maximum
single control (TEMPOMIX and TEMPOMIX 3) or using temperature limiter to save time during installation,
Vandal-resistant the side lever (TEMPOMIX 2 and TEMPOSOFT MIX). and can be adjusted by the installer.

Anti-scalding safety Minimal servicing
DELABIE's time flow mixers are supplied with Flow straighteners and mechanisms are made from
a pre-set maximum temperature limiter that can be scale-resistant materials (Hostaform ).
®
YEAR adjusted during installation. The user cannot increase The self-cleaning mechanisms are protected by filters.
the temperature above the maximum set temperature,
reducing any risk of scalding.
Simple to maintain
The spare parts are standardised to ensure quick
WARRANTY
Technical characteristics and easy replacement by maintenance staff.
The whole of the system is integrated within
Operating pressure 1 - 5 bar, 3 bar recommended
an interchangeable cartridge without removing
Pressure differential ∆P < 1 bar the tap. For the mixer versions, non-return valves
HW / CW are integrated into the flexibles.
YEARS Temperature limiter* Can be adjusted 30-year warranty against any manufacturing defects.
50 years repairability.
55°C max
HW supply
Adjustable flow rate 1.4 - 6 lpm
REPAIRABILITY
Time flow 7 seconds
TEMPOSOFT, TEMPOMIX,
Soft technology
TEMPOMIX 3
TEMPOSTOP, TEMPOSTOP 2,
Anti-blocking system
TEMPOMIX 2, TEMPOMIX 3
Recommended installation 110 - 200mm
height for wall-mounted
mixers/taps above base of bowl
* Depending on model

48 Basins